High pressure welding fume extractor GTC1A22

High-pressure welding fume extractor with integrated filtration (micrometric reduction 97-98% at 0.3micron) to be connected to max. 2 suction torches of the SAT line, specifically for industrial use in continuous operation (100% duty cycle) thanks to the robust aluminium blower/turbine with three-phase motor of leading brand. The aspirator is designed for operation in manual or automatic mode; in the latter, the aspirator is activated and, by means of a timer, deactivated in synchronisation with the welding cycle.

• The maximum distance, pipe length, between the suction point and the fume production point is 20-25m.

• Ideal solution for one or two welding stations and re-introduction of fumes into the environment (where permitted due to the 98% filtration degree at 0.3μ in class 10) or directly with expulsion to the outside.

• Automatic activation during arc initiation makes it fully automatic without loss of time.

Construction

• The entire structure is built in a frame with aluminium extrusions and clad with press-folded sheet metal panels and powder-coated

• powder-coated. It guarantees an IP55 degree of protection.

• the pre-filter housing chamber is made of 20/10 sheet metal and of dimensions

• designed to create an air slowing plenum for correct filter passage speed

• Complete with electrical panel for control and protection

Technical characteristics

• Suction from max 2 torches simultaneously

• Power 2200Watt 400/3/50 three-phase

• Max flow rate 240mc/h

• Nominal pressure 250 mbar

• Sound level 72db(A) at 1,5 mt in open field

• Dimensions 490b x 880h x 650d

• Weight 80 kg

Filter section

• Stage 1: Calm prechamber for larger particle abatement

• Stage 2: 99% eff polyester cartridge filtration

• Stage 3: micro-filter panel double seal and protective nets. MPPS efficiency >95%

• Stage 4: Active carbon panel for deodorization