MFU-HW welding fume extractor with superflex arm

Do not breathe in fumes and micro-dust released into the environment during welding! Rely on HEPA H13 filtration to reduce welding fumes and micro-dust using an MFU welding fume extractor, specifically designed to extract and filter fumes and micro-dust generated by metal welding processes, filtering 99.99% of particles larger than 0.3µm.

The MFU series welding fume extractors represent the state of the art in technology for the drastic reduction of risks derived from fumes and micro-dust in professional work environments. Pollutants are quickly extracted at the source thanks to the high-capacity hood and then filtered at 99.99% thanks to HEPA technology, which guarantees the reduction of micro-dust from 0.3 µm upwards. 

For this reason, the MFU welding fume extractor is classified as W3 compliant for the filtration of carcinogens as required by the UNI EN ISO 21904-1:2020 standard.

Technical features 

· High suction capacity

· Compact and easy-to-handle structure;

· Self-supporting suction arm with SUPERFLEX pipes, working length 3 or 4 meters;

· Air recirculation in the environment with H13 HEPA absolute filtration - 99.99%

· W3 classified, compliant for the filtration of carcinogens;

· On-board electrical panel with indicator light to signal filter clogging and hour meter for machine maintenance log keeping;

· Single-phase plug and cable with Schuko socket requires no electrical installation and is ready for use;

· High-capacity extraction hood with handle for easy positioning.

 3-stage filtration in detail:

-stage 1: G3 effective anti-spark metal filter (ISO 16890 Coarse 70%+)

-stage 2: acrylic filter eff. G4 (ISO 16890 Coarse 70%+)

-stage 3: absolute filter eff. H13 ≥99.95% @ MPPS in accordance with EN 1822:2019

How it works

The welding fume extractor purifies pollutants that pass through the system from the arm in the machine downwards and are purified with 99.99% efficiency. The clean air is reintroduced into the environment through grilles located at the bottom of the sides of the machine, for maximum efficiency and energy savings.

Safety in accordance with regulations 

The level of filter clogging is monitored by a control that alerts with a light signal when it is necessary to clean or replace the filters, in order to avoid continuing work without air filtration. ref. UNI EN ISO 21904-1:2020